This website uses cookies to give you the best experience. By using this website you consent to the use of the cookies.
Search the web site
Categories
- CLASSIC VESPA
- CARBON FIBRE PARTS
- RUBBER PARTS
- ENGINE
- FRAME
- QUICKACTION TWISTGRIP
- SHOCK ABSORBERS
- FOOT PEGS
- BEADING LEGSHIELD
- STANDS
- CABLES AND CABLE NIPPLES
- RIMS
- HORNS
- SIDE PANELS
- SPEEDO AND INSTRUMENTS
- SPARE WHEEL COVER
- WIND SHIELDS
- LIGHTS
- FORKS AND FRONT HUBS
- BLINKERS
- BRAKES
- BRAKE SHOES AND PADS
- WIRINGS
- BULBS
- BRAKE AND CLUTCH LEVERS
- GRIPS
- HANDLEBARS
- HORNCOVERS
- MUDGUARDS
- FLOOR RUNNERS AND PLATES
- RACKS AND BAGS
- CRASH BAR SIDEPANELS AND MUDGUARDS
- SEATS
- TANKS
- CYLINDER LOCKS
- MIRRORS
- BRAKE DRUMS
- FLOOR MATS
- BADGES AND EMBLEMS
- FRAME AND PARTS
- FRAME REPAIR SHEET
- SPEEDO TRANSMISSIONS
- FIBERGLASS PARTS
- BOLTS
- CLOTHES
- STICKERS AND PATCHES
- WORKSHOP EQUIPMENT
- HELMETS
- CATALOGUES
- GADGETS
- GIFT VOUCHER
- WORKSHOP
- OIL
- TYRES
- LUCCHETS AND CHAINS
- MOPEDS
- LAMBRETTA
- MODERN VESPA
- APE
- CLEANING PRODUCTS
- SCOOTER
Search by brand
QR Code
Feedback
- 06.09.2026 Car (TO)Clutch springs MALOSSI RACE reinforced for 7 springs clutch Vespa Largeframe, stiffness = XL, 7 pcs
10pollici e una garanzia Consegna veloce ed ottimo servizio Grazie alla prossima
- 06.09.2026 Car (TO)
Servizio ottimo, Consegna velocissima. Grazie
- 01.09.2026 Bri (PU)Ignition coil CIF HQ Vespa 50, Special, SS, 90, 125 Primavera, VNB, GT, GTR, Super, TS, VBB, GL, Sprint, Sprint Veloce, P125-150X
La bobina, con un leggero sforzo durante l’innesto del cavo dell’alta tensione, si è spezzata a metà, rendendola completamente inutilizzabile.
- 28.08.2026 Dan (SV)Cylinderkit VMC 177cc "SuperG" Vespa Largeframe 2 ports, iron cast, d.63 stroke 57 - cast aluminium head - SIDE SPARK PLUG
Grippato dopo 300 km, ottimo cilindro ma tolleranze troppo strette
- 27.08.2026 Str (AP)Number plate frame "High quality" CIF Vespa 170X170
top!!!!
Fuel hose BGM Ø 7x14mm, L=750mm - TPR/PUR (non-hardening) - suitable for Vespa Largeframe
Description
The BGM PRO Tpr-Pur fuel hose is a professional fuel hose that does not harden.
The hose is manufactured for BGM PRO in Italy to extremely high quality standards (the manufacturer also produces for KTM series vehicles, among others).
Media resistant to: Gasoline, oil, acids. Alkalis, alcohol
UV resistant
Durable
The hose has the typical Vespa dimensions of Ø7x14mm. It has a very high kink resistance and can therefore also be laid in small radii. The material is also very abrasion resistant and is also permanently resistant to an increased alcohol content in gasoline.
Inner diameter: Ø7mm
Outer diameter: Ø14mm
Length: 750mm
The large outer diameter provides a perfect seal in the through rubbers in the frame.
TIP: In the PX models, the fuel hose should be laid as long as necessary and as short as possible to always have a sufficient supply of gasoline. To do this, first connect the hose to the tank, insert it into the frame, then guide the hose through the carburetor bowl, and pull a little until the excess hose length is out of the frame.
Only then cut to length.
The hose is manufactured for BGM PRO in Italy to extremely high quality standards (the manufacturer also produces for KTM series vehicles, among others).
Media resistant to: Gasoline, oil, acids. Alkalis, alcohol
UV resistant
Durable
The hose has the typical Vespa dimensions of Ø7x14mm. It has a very high kink resistance and can therefore also be laid in small radii. The material is also very abrasion resistant and is also permanently resistant to an increased alcohol content in gasoline.
Inner diameter: Ø7mm
Outer diameter: Ø14mm
Length: 750mm
The large outer diameter provides a perfect seal in the through rubbers in the frame.
TIP: In the PX models, the fuel hose should be laid as long as necessary and as short as possible to always have a sufficient supply of gasoline. To do this, first connect the hose to the tank, insert it into the frame, then guide the hose through the carburetor bowl, and pull a little until the excess hose length is out of the frame.
Only then cut to length.
Reserved area
Shopping cart
Shopping cart is empty
Utenti in linea:
138
Ultima sync: 18:23 (del giorno: 17/09/2026)
Ultima sync: 18:23 (del giorno: 17/09/2026)
Offers
Cylinderkit VMC STELVIO 1.0 177cc Vespa 125 PX, TS, Sprint V. aluminium, d.63 stroke 57, cast aluminium head SIDE PLUG ANGLE
€ 280,00 Discount 5%
€266,00 VAT included (22%)
CYLINDERKIT POLINI 102cc VESPA 50, PK, XL D.55 STROKE 43mm
€ 201,81 Discount 20.2%
€161,04 VAT included (22%)
